***NOTE: Please make sure to order the correct size from the dropdown menu. [Intellijel 1U size format is 39.65mm high, Pulp Audio size format is 1.7" high]. Pulp Audio format will ship at the end of May, Intellijel format is shipping now.

 

The Zorx 1U CV Bus is an 84 HP 4 - 1 x 4 or 2 - 1 X 8 buffered mult with attenuation/attenuverting on each output for use with audio and CV signals.

There are four channels, each with four dedicated outputs, separated into groups of four. 4X4X4. Input a signal into any channel and use that channel’s outputs to spread the input signal throughout your rig. With outputs spread out in this manner, it inspires creative modulation and patching.

 

Channel 1’s input is normalled into Channel 2’s input for use as a 1x8 mult. Likewise, Channel 3’s input is normalled into Channel 4’s input for use as a 1x8 mult. When nothing is patched into Channels 1 and 3,+5V is fed into each input for use as an offset throughout their respective channels with a peak to peak voltage of -5V to +5V available at each output.

 

Each output has attenuator/attenuverter potentiometer control. Center position is off - no signal at the output. These outputs are buffered so that with one input you can have four separate and different variations of the input signal at each of its corresponding outputs.

 

See-thru color coded LED indicators denote which channel an output belongs to for easy maneuvering during live performance and in dimly lit situations, and there are also numbered dots below each potentiometer that denote that as well.

 

The Zorx 1U CV Bus uses +12V 90 mA and -12V 90mA, and doesn’t need a +5V rail to operate. It has a depth of 27mm. The faceplate is black matte with copper.

 

The 20 HP Zorx SILENCER 1U CV BUS Expander is also available to buddy up with the 1U CV Bus.

 

The Zorx 1U SILENCER is a clickless 20 HP 4 channel performance silencing module that lets you manually switch each channel on and off, thereby muting it, with latching or momentarily capabilities. There is also a MIX OUT that sums all of the SILENCER's outputs into a single mono output. A connector cable [included] can be connected from the rear of the Zorx 1U CV Bus to the rear of the SILENCER which will take the last four outputs of the Zorx 1U CV Bus and duplicate them, normalling them to the corresponding inputs of the SILENCER. This normalization can be overridden by patching an input into each channel so that the SILENCER can act on its own or in tandem with the Zorx 1U CV Bus, or a combination of the two. Illuminated numbered dots correspond to the 4 channels of the 1U CV Bus for easy recognition.

 

The SILENCER can be used as a 4-channel on/off/(on) performance switch, a 4-channel audio or CV mixer, or a combination of the two while having control of which channels you want in the final mix.

 

The SILENCER consumes +12V 40mA and -12V 40mA and has a depth of 40mm.

 

Zorx 1U CV BUS

$329.00Price